PS3 jailbreak 2 chơi dc game 3.6+ ???

Vậy giáng sinh bạn gái ông rủ đi chơi thì nói " Anh ở nhà chơi COD MW 3 em à" sao

 

^
Với game thì bạn gái cũng chỉ là mớ bòng bong, mà khi bạn gái rủ xếp hình thì game cũng chỉ là mớ bòng bong :(

 

COD MF3 thì chơi trên PC rùi Tới đó nói em đi chơi noel với bạn đi còn anh thì ở nhà luyện game mới

 

giống giáng sinh năm ngoái chăng , tung CFW của PSP

 

what the fu2k?

This is the first firmware version 3.56 of custom,
This custom (its most basic) was ready for about 7 or 8 months, but it was not until
Now when I decided to publish it.
It has nothing to do with the recently published exploit the metldr, although the appearance is imminent
futures higher firmwares, for which he wants to try, here it is.

First of all thanks:

- Graf_Chokolo, for their great work.
- A Demonhades, for its testing, its great strength.
- A JaiCrab, for their help.
- A Lara, for making me laugh a day.
- People who have tested this 3.56 MA-1, thank you very much.
- To all that s @ s who donated for a flasher, no firmware ell @ s this far along would not exist as such.
- A Varicella by their selfless help.
- A B.E, smile
- A M.E.M, do not forget and forgive.
- Tod @ s @ s that I forget that by mistake, apologize.

As the first version, it only takes the most basic functions of a custom firmware, now I'll explain.
Also explain the changes performed in the 3.56 Sony, and as in its release notes, which
argued as a simple patch was not just a patch.

- FUNCTIONS

* Support PEEK / POKE lv2, using the typical SYSCALL 6 and 7 for compatibility with existing homebrew.
* Support PEEK / POKE lv1 native SYSCALL using 10 and 11 respectively. These use the same syscall
than the lv2, the devs just have to use them as you would those of lv1 lv2 but affecting.
* Load unsigned applications, FSELF format natively. That is, a normal application or npdrm
FSELF valid format worked directly. (No touch-memory copy in the lv2).
* Load logically signed applications, both official and unofficial signature valid.
* Support for applications up to version 3.56.
* Use of all SYSCALL system, provided that the product no later verify mode, QA, etc.
* No need to modify the PARAM.SFO in the event that hypothetically would use a application that requests
a version higher than 3.56 in either npdrm / normal application / or application running from the bdemu.
* Installation of Retail and Debug PKG since the PKG Install option.
* System settings in the XMB QA hacked. Now you can open the options using the normal combo without
QA flag is active or a valid token or existing on your machine. Any options changed is maintained
in the system registry settings.
This QA system hack allows any SPRX to call the XMB to check this information
hacked receive information, such as the nas_plugin.sprx, which in the case of DEX would permit
installed without any patch of PKG Retail.
As always be careful you do with those options, this is the safest way to have the QA without
be QA, and not have to modify the EEPROM in any recalculated appearance or tokens of any kind.
Here I have to thank Sony for making the security of your token only be in one byte and not in those
should be.

- LV2

* FIX: Patch to allow loading of applications for (avoids errors 0x80010009)
* FIX: Patch to avoid checking the firmware version of the application against the version of firmware
stored in the memory of lv2 (avoid the error 0x80010019)
* FIX: Patch to avoid the error 0x8001003C (allows loading of applications that request more internally than the current version)
* FIX: Patch to avoid the error 0x8001003D
* FIX: Patch to avoid the error 0x8001003E (using hdd patch and have no disc inserted)
* FIX: Enables the use of all SYSCALL, avoiding generic error 0x80010003.

- CHANGES IN THE LV2 356:

* FIX: Patching a new security check that prevents updater mode, it could launch an application
unsigned with the minimum key 0xD (3.56), avoiding the error 0x80010009. NOTE: See NOTE AT THE END OF THIS README

* FIX: otherwise is used to integrate the new SYSCALL 6, 7, 10, 11 at lv2.

- LV1

* Added support for PEEK / POKE NATIVE at lv1. The method used to integrate these new hypercalls not use
hypercall existing one, but really any hypercall not used in the system is a peek or poke
depending on the case.
To interact with PEEK / POKE, lv2 use SYSCALL of 10 and 11 respectively.

* Changes in the hypercall mmap (114). In the 3.56 Sony made significant changes in this hypercall to avoid
the use that was being given to the lv1 to lv2 mapping.
Now this hypercall checks that the key argument has not been modified, are checked mapping ranges
(Someone who understands this will realize how dangerous it is for you to map the critical, and do not speak the lv1)
the hypercall code is divided into sub-functions into chunks for rolling the analysis.
3.56 In this version of this hypercall MA has not been touched, but having the support of PEEK / POKE in lv1
mapping is no longer necessary.
In a later version is not ruled out such a check hypercall it's not complicated really, just
it was not necessary for this version.

* Changes in the hypercall unmap (115), similar to mmap, its code shared between subfunctions.

* FIX: Added some patches to avoid integrity checks lv1 / LV0.
* FIX: Added patches in the SPM and the DM to enable the use of any service. The patch is different,
smaller, the SS patch exists (this is no longer compatible with 3.56), in my testings my patch does not produce any kind of problem with trophies, or saved games, etc..

* TODO: Delete the problem of not being able to downgrade to a version lower than 3.56. Currently not possible
down from 3.56 after upgrading to the.

- LV0 APPLDR

* FIX: Patch to override the check ECDSA digital signature. Now an application with an invalid signature
signed will be considered valid.
For example, "sign" an application without having the proper private key to generate a proper signature.
* FIX: Patch that removes the hash check of the application segments. A hash will be considered invalid
valid.
* FIX: Patch to override that you can not use FSELF retail consoles. This patch is different from that
in ps3devwiki, the patch is on that page about this subject brickea machines has a problem
metadata to decrypt the encrypted executables retail.
* FIX: Patch to override the protection added in 3.55 (in the case of applications npdrm / normal, previously only
was in charge of the RVK) which prevents applications can be used above the indicated version in the firmware
today. That is, in a hypothetical case, a game trying to throw in a 3.60 3.56.
* FIX: Patch to override the protection auth check the applications (added in 3.56), this check
detects programs created public tools as they always put the same auth, auth superior one.
* FIX: Patch to remove the protection from the white list of authorized programs, added in 3.56. Now you can
use all applications as 3.55 and below.

- NOTES

* The lv2 is protected by a hash in lv1, in case you want to play an offset that encompassed
in the range of protection, this would produce a panic check off the system.
To avoid this problem, use the tool that is attached to this package before using poke modify lv2.
Why not to implement this patch directly is because not everyone is dev, and that can not be touched
lv2 is safe for the user.
Of course the source code of this program is included, so a dev can see how using the POKE
lv1 patched the problem.

* You can now enter service mode, and use the lv2diag as before, but this has a potential danger.
The 3.56 now makes it impossible to make a downgrade to less than 3.56, meaning that if you are in the 3.56 in him are,
if you have time you tried to cancel out a version that checks the update manager.
The problem is a programming error that allows updating Lv2Diag.self, the failure is that
No checks that the update is in the usb or to verify that this is valid, the program formats the flash 1.2 and 3.
That is, if then fails, your system would not have died partially flashes, still work
ROS can use a lv2diag active again, but who Forewarned is forearmed. Lv2diag Beware!

* Attached to this package is an updated application to extract the nodes of a dump of lv1 is an update
of the application made by Graf Chokolo, now has support for versions 3.15, 3.41, 3.55 and 3.56 in one
program. Useful to display the nodes extracted from your dump.

* The firmware finished graphic will be added when finished JFW 3.41 itself.
* In the package adds an application, I do not think there publicly, to put the product model
directly from the XMB, acts as a toggle, in the event that you can use the product as simply
So I removed the product.

As a final note to remember that this is the first version of the firmware, so constructive criticism are welcome.
As I suppose that due to this publication where patches are appldr, many variants will come out of it,
just remember that the first publication was this.

Mordais not the hand that feeds you, today is like tomorrow is a 3.56 higher, or maybe not,: violin:

: Violin: http://www.multiupload.com/WO4UYJIJ6T: violin:

Source: demonhades.org

 

Máy em không cuốc nổi con COD MW 3 nên chờ bản Patch nản quá
Dragon Ball Ultimate Tenkaichi không biết khi nào patch được nhỉ =.=

 

tui demonhade chán quá T____T.........................

 

True Blue User Guide v2.2

Introduction

Unlock the true potential of your PS3 with True Blue – keep your PS3 on a homebrew enabled custom firmware, while at the same time enjoying the newest and most popular PS3 games.

Features include:

* Booting of games designed for PS3 system software v3.6 and above
* Runs your existing games and new v3.6+ games from HDD in conjunction with standard backup managers
* Does not require the power/eject trick
* Custom v3.55 Dongle firmware behaves like OFW when True Blue is not inserted
* Manufactured from highest grade components and Actel based
* Durable and high quality metal case design
* Tough and durable plastic packaging
* Further features to be added as they are developed
* On board 2 MBytes SPI flash
* Supports Fat and Slim PS3 consoles currently running any firmware up to v3.55 and any PS3 which can be downgraded successfully from v3.6+ to v3.55 (NOTE: requires other tools, True Blue cannot downgrade a console)
* Supports all regions of consoles
* Supports all regions of v3.6+ games
* Rock solid crystal oscillator on board for flawless timing

Setting up your PS3

Before you may use True Blue, you must first install the 3.55‐Dongle custom firmware onto your PS3. This is similar in function to the well known kmeaw CFW; however it also includes modifications which allow True Blue to operate correctly. The 3.55‐Dongle firmware updater is distributed in a file labelled “TrueBlue‐3.55‐CFW.ZIP”, and may be obtained through an internet search – once you have obtained it, please confirm the validity of the PS3UPDAT.PUP file contained within the ZIP archive by matching with one of the following hashes:

MD5: 43C522F8897D77B6165F95BCF3409090
SHA1: A64B010DB98996C7E53768D37D4D346F271D5950

Once you have confirmed that you have obtained the correct updater file, proceed with the update as follows:

1. Obtain a USB storage device such as a USB HDD or USB flash memory stick
2. Create a folder on the storage device in which to save the update file. Using a PC, create a folder named “PS3” on the storage device. Within the PS3 folder, create a folder named "UPDATE"
3. Copy the PS3UPDAT.PUP file to the “UPDATE” folder created in step 2. Thus, you will have this path structure on your USB storage device: \PS3\UPDATE\PS3UPDAT.PUP
4. Boot your PS3 and insert the USB storage device into the PS3
5. From the home menu, select (Settings) ‐> (System Update) ‐> (Update via Storage Media)
6. The PS3 will notify you that the “3.55‐Dongle” update was found. Select OK then follow the onscreen instructions to complete the update
7. After the update has completed, your PS3 will restart and you now be running the 3.55‐Dongle custom firmware. You may now enjoy the use of the True Blue dongle

(NOTE: The above procedure is only applicable to PS3’s on or below system software v3.55)

Using True Blue

To use True Blue, simply insert the dongle into one of the USB ports on your PS3 and power the system up. Do not remove the dongle at any point while the PS3 is running.

True Blue for the most part functions just like a regular jailbreak/CFW in that you may install and run any homebrew software and all of the standard backup managers are supported. The most notable difference is that games designed for PS3 system software v3.6 and above are also supported.

However, in order to enjoy such titles, you must first obtain special “True Blue versions” which have been modified to function with True Blue. Such modified versions are available for download through the “usual channels” and are clearly labelled as being True Blue compatible.

Once you have obtained True Blue modified games, simply copy them to your PS3 internal or external USB HDD as you would with any usual jailbreak game and launch in the usual manner through any one of the many available backup managers.

Updating True Blue

From time to time, we will release firmware updates for True Blue which will add new features.
Directions and a list of changes will be provided inside the firmware update archive file.

For More Information(download links provided on the link below)

http://www.ps3crunch.net/forum/threa...lue-v2.2-F.A.Q
Theo cái này viết chơi trên đc HDD

 

ráng ráng lên các bác ơi, để em update bài của mấy bác lên trang đầu