như các bạn đã biết giả lập ps1 đã chơi online được từ lâu,vậy thì giả lập ps2 liệu có chơi được online không ? chúng ta cùng thảo luận trong topic này nhe đây là hướng dẫn: How To Play Online Guide Original post by Refraction Here is a simple step by step guide for playing your games online. First and foremost, 32bit users will need to get WinPcap from HERE 1. Rip your cd/dvd to iso format! (very important) And the Network Access Disc if you have it. 2. Burn the Disc ID Util CD Version to CD or Disc ID Util DVD Version to DVD and run it on your PS2 (using tricks described in the BIOS dumping guides) 3. Insert your game disc and press X, Read off your Disc ID, this is your DNAS code. You might want to read your Network Access Disc Disc ID too, so you can complete the setup. 4. Run WinDIP, select your iso, press the scan file, then verify version. 5. Enter your Disc ID in to the 5 boxes. 6. Hit patch 6.5. Repeat 4-6 with your Network Access Disc. 7. Next you will need run the Network Access Disc, or some means of making your network config, some games might work, but some will just show garbage, so this is the best option. All network adapters and slim PS2's come with one. DHCP doesn't work, so hard code your IP addresses. You can either run this on your PS2 and transfer over your NETCONF files to a PCSX2 memcard, or run it on PCSX2 directly. 8. Run your ISO and have fun playing online Edit: An update by abdo123: Step 2 and 3 can be done with PCSX2 itself ( 0.9.7 or higher ) You run the ISO "Disc ID Util CD\DVD Version" and then switch to your game's ISO (the game that you want its' ID ) using swap disc and press X. This will give you all 3 IDs. Note: when you configure the dev9 plugin, tick the ethernet mode, switched mode will work if your ethernet card supports promiscuous mode, otherwise you need to use Bridged, which should be more compatible. Important Note: If you get DNAS errors -880 or -881, copy your bios back over from the dump, deleting anything in your PCSX2 BIOS folder first, then check the file names! The new dumper tends to put the CRC in the filename, so when PCSX2 reads your BIOS it cannot find the NVM file (which you need for your MAC address) so make sure they have exactly the same name and you aren't using a blank file made by PCSX2! Any other methods discovered or explained on the forums, posts will be edited and forums will be given. This is the closest thing to legal you are going to get, any other method will be considered highly illegal, especially if it involves getting your DiscID from somewhere other than your disc. If you recieve a DNAS error, check this site 2.0 DNAS Error Codes DNAS - Error Code FAQ - dslreports.com http://forums.pcsx2.net/Thread-How-To-Play-Online-Guide đây là 1 số ý kiến về việc chơi online pcsx2 "Yes, it worked finally!!! We just used Hamachi and then in DEV9 settings, in Ethernet Device we checked: "pcap bridge: Hamachi Virtual Network Interface Driver". And it really worked!!! We played in versus mode and we had about 19-24 fps, so it was slow, but I've thought that it will be worse. It's playable, but it works in slow-motion. On default settings in single player I have 30 fps, so it's not big difference. We didn't have to use this Network Access Disc. At the end we had: We had 2 fights. The main problem is that the emulator resets all settings to default while playing online. That's why it works slow. Maybe there is a way to use our own settings? If both players will use the same settings, there shouldn't be any desynth. Also, maybe we should turn off sound? Will it work better then?." http://forums.pcsx2.net/Thread-PCSX2...Netplay?page=3
